About Us

Suit for InSinkErator Water System

Aqua Blue Generic Replacement for InSinkErator Water System.

Compatible for InSinkErator®
F-701 Filter
Compatible for InSinkErator®
F-601 Filter

li See more li See more  
AquaBlue H2O AB912WF
AB912WF Operating Specification

li Flow Rate 3.8 lpm
li Operating Temperature min 0.6°C (33°F) / max 38°C (100°F)
li Operating Pressure min 172 kPa (25 psi) / max 862 kPa (125 psi)
li Capacity 13,250 litres / 2,900 gallons
li Service Life 12 months
li Dimensions 23cm (length) x 8.25cm (diameter)
li Have any queries?
Part No. AB912WF
GTIN 0 648236 964019
EAN-13 0 648236 964019
UPC-A 6 48236 96401 9
UPC 648236964019




Water filter fits InSinkErator F-601

Replacement For: InSinkErator® F701 / 3M® HF15, HC351, HC351S / Instanta®AQ35 / EcoAquaEWF-8001A



Reduces: *Sediment *Offensive Taste & Odour *Bacteria *Chlorine *Girdia & Cryptosporidum
Contains: Scale inhibition media.

The InSinkErator Replacement Filter Cartridgereduce chlorine taste and odor, lead, mercury, asbestos, cysts and chemicals for clean and healthy water.

These cartridges make replacing old cartridges fast and easy without contact with used filter material.

li Reduce chlorine taste and odor in water for a clean and refreshing taste
li Reduce lead, mercury, asbestos, parasitic cysts and chemicals in drinking water
li For use with InSinkErator water filtration systems
li Last up to 12 months, depending on water quality and usage
li Replaces old cartridges quickly and easily without requiring contact with used filter material
li Twist-and-lock design


* Caution: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
* To ensure optimal performance and hygiene and to prevent build up of contaminants, we recommend Aqua Blue H20 filters are not used
   any longer than 12 month.



How to Replace Cartridges


li Turn cartridge slowly to the left, about 1/4 turn, until it stops (when arrows line up). At this position,
     both inlet and outlet ports are closed and water pressure has been relieved.
li Pull used cartridge straight down and discard.
     Note: There may be a small amount of residual water drainage after pressure is relieved and during cartridge removal.

li Remove sanitary cap from top of new cartridge. Moisten o-ring with water and push new cartridge into filter head.
     Turn cartridge 1/4 turn to the right until it stops. Top surface of cartridge will become flush with bottom of the head
     when fully engaged. The label should be facing forward.
li Open downstream valve (if installed) and flush new filter cartridge in accordance with Performance Data Sheet expelling
     Tany trapped air and carbon fines. Water may run cloudy with air but will quickly clear.


li Go to see all of "AquaBlue H2O Products"