About Us

Suit for Haier Fridge Water Filters

Aqua Blue Generic Replacement for Haier Fridge Filters.

External In-Line Fridge Water Filter
For Haier Fridge Model HFD647WISS, HSBS562IS


li See more  
AquaBlue H2O DA2010CBWF
DA2010CBWF Operating Specification

li Flow Rate 0.5 GPM
li Operating Temperature min 34°F / max 100°F
li Operating Pressure min 30 psi / max 125psi
li Technology Carbon Block
li Function Chemical and Mechanical Reduction
li Capacity 3,785 litres/1000 gallons
li Service Life 6 months
li Dimensions 25.6cm (length) x 5.4cm (diameter)
li Have any queries?
Part No. DA2010CBWF
GTIN 0 643129 713415
EAN-13 0 643129 713415
UPC-A 6 43129 71341 5
UPC 643129713415




Aqua Blue H2O Compatibl External Inline Fridge Water Filter DA2010CB
Suits for Haier Fridge Model HFD647WISS, HSBS562IS

This listing is for external compatible water filters with 1/4" pushfit connections.

This listing is for inline external water filters.


This filter has built in 1/4" Push Fittings at either end. You simply push your existing 1/4" Water Pipe straight into the cartridge and it will grip to make the connection. This connects in-line with the water pipe going into the fridge to provide the fridge with filtered water.


The DA2010CBWF fridge filters for compatible with the following filter part numbers:

li Haier Fridge Model Number: HFD647WISS, HSBS562IS


Installation Instructions

This is for external compatible water filters with 1/4" pushfit connections
You are buying Superior Quality compatible filters with push-fit connections.

Installation and replacement procedure for the Compatible External fridge water filter :

1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.

2. Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.

3. Take the new filter, making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 – 10mm and you will feel it hit home.

4. IMPORTANT - Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remov e any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.

5. Complete the Replacement Due sticker and place in a visible area inside the fridge door.



The DA2010CBWF Water Filter reduces the following health related contaminants:

li Chlorine Taste and Odour
li Particulate (Class III)
li Sediments
li Dirt
li Rust

As with all built-in refrigerator water filters, the DA2010CBWF does not remove Fluoride.

Note: The filter provides cleaner, fresher water & ice.

Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water


li Go to see all of "AquaBlue H2O Products"