Fisher & Paykel Water Filter Cartridge Reaplacement
for RS90AU1, 842802 / 839041

This listing is for inline external water filters.

 

 

 

Instructions

1. Note: Filter must be pushed firmly into receiver and turned until filter is locked in place. If filter is not locked correctly, water will not flow.
2. DO NOT use any tools to install this filter.
3. Twist the old filter a quarter-turn counter clockwise.
4. Pull the filter straight down and discard (don't worry, the water will shut off automatically).
5. Remove the reusable colour-keyed knob from the end.
6. Slide the knob onto the end of the new filter.
7. Push the new filter into the fridge until it stops and twist the filter a quarter-turn clockwise. Note: Following a successful clockwise quarter-turn installation, grip on reusable colour-keyed knob may not align parallel with refrigerator’s bottom grill grates.
8. Reset your change filter light (if your fridge has one).
9. Flush filter with 3-4 gallons of with water until water runs clear. Some noise is not uncommon as air is purged from the system.
10. If filter sets for several days without use, flush a quart of water through the filter to remove stale water from refrigerator water lines.

 

 

Resetting Your Filter Change Indicator

1. Press the light switch (the one that the refrigerator door presses every time you close the door) 5 times within 10 seconds or if the fridge has a filter button, press and hold it for 5-10 seconds

 

 

 Go to see all of "AquaBlue H2O Products"